In modern society, the rapid development of various industries, many manufacturers will use a variety of professional warehouses in the production process, but the effective operation of these warehouses also need the help of various equipment such as stacker, stacker as one of the important logistics equipment in the daily automated stereoscopic warehouse, directly determines the normal access to the warehouse during the operation of the automated stereoscopic warehouse. So, how to use a stacker?

1. manual stacker use method

1. The fork plate of the stacker can be parked at a point below or above the shelf position of its floor. When manually controlling the stacker to pick up the goods, it will first stop at a point below the shelf position, and then extend the fork plate into the warehouse, lift it to a point above the shelf position, and finally retract the fork plate to remove the goods. When placing the goods, the manual control stacker stops the plane position of the shelf position above a point, and then extends the fork plate into the warehouse, lowers it to a point below the plane position of the shelf position, puts in the goods, and finally retracts the fork plate.

2. The fork plate of the stacker can be parked at a point below or above the shelf position of its floor. When manually controlling the stacker to pick up the goods, it will first stop at a point below the shelf position, and then extend the fork plate into the warehouse, lift it to a point above the shelf position, and finally retract the fork plate to remove the goods. When placing the goods, the manual control stacker stops the plane position of the shelf position above a point, and then extends the fork plate into the warehouse, lowers it to a point below the plane position of the shelf position, puts in the goods, and finally retracts the fork plate.

Note: Before moving the hand/auto switch to auto, the left or right button must be clicked to extend the fork back to the middle position, which is located at the bottom of the first layer.

3. Determination of the location of the stacker warehouse from right to left in 1-16 columns, the 16th listed as the shipping platform, the first listed as the loading platform. 1-5 floors from bottom to top. The name is a cube warehouse, starting with B1, with a total of 80. The location address of the stereo warehouse is represented by a string: the first two digits indicate the row where the location is (there is a line in the laboratory, defined as B1); The middle two digits are the columns of the pilers; The last two digits are where the piler is located. For example: B10501, this means that the current position of the stacker is the layer of the fifth column.

2. the use of automatic stacker

1. Switch the manual/automatic switch in the cabinet;

2. Close the main power gate, and the power indicator of the stacker machine chassis and the inlet and outlet power chassis will light up;

3. Switch the manual/automatic switch on the stacker machine chassis and the storage machine chassis to the automatic gear, and ensure that the emergency stop button is not pressed;

4. Operate the stereo library operating software in the alarm information page to check whether the current actual position is correct. If not, enter the correct position;

5. Select the task to be performed, click the Start task button, and operate the software task assignment page in the stereo library.